Viking products

Code de produit : SRC-1 The SRC-1 enables a standard touch tone phone to securely operate a set of timed relay contacts to control a doorstrike or gate controller at a remote location. The SRC-1 is fully user programmable and uses non-volatile memory. The SRC-1 eliminates the possibility of dialing the activation code through the entry phone using a hand held touch tone dialer. The SRC-1 features a switchable 32V talk battery to allow use with any of Viking’s entry phones (E Series), doorboxes (W Series) or hot-line/panel phones (K Series). The SRC-1 is installed between the entry phone and the secure phone, and will reject touch tones from the entry phone and only operate the relay if the correct activation code (user programmable) is given from the secure phone. The SRC-1 also provides up to 32 keyless entry codes to operate the relay from the entry phone with 1 to 6 digits. This feature can be disabled in programming for increased security.   Description détaillée

Code de produit : PB-100 The PB-100 hardware and software provides inexpensive PC to Telephony applications on an open source basis and makes it easy to create your own application solutions using standard programming languages such as Microsoft’s Visual Basic®. Applications such as message announcement centers, voice dialers and auto attendants may easily be created to your custom specifications. The PB-100 accepts simple ASCII serial commands to seize the phone line, dial or decode DTMF Touch Tones, watch for busy signal, detect loop status, perform timed hook-switch flashes or hang-up the line. If your PC is equipped with a sound card, the audio ports can also be coupled to the phone line through the PB-100 for voice recording or playing announcements using standard file formats such as .wav files. The PB-100 hardware features a serial port interface, an “AUDIO IN” and “AUDIO OUT” port, an analog C.O. line interface and an analog phone port. Several pre-written applications are included and can be installed for use. In addition, all available source code is provided to allow changes or improvements to existing programs.   Description détaillée

Code de produit : K-1900-7 The K-1900-7 panel phone will auto-dial a 1-32 digit programmable phone number each time the handset is lifted. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls. The K-1900-7 housing consists of a heavy gauge stainless steel panel, an armored cable, a heavy duty handset, and an all metal cradle. The K-1900-7 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory. For outdoor or harsh environments, the K-1900-7-EWP is available with Enhanced Weather Protection (EWP). The EWP version includes faceplate, transmitter and receiver gaskets, hand soldered silicon sealed connections, gel-filled butt connectors, as well as a urethane potted circuit board with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming   Description détaillée

Code de produit : K-1700-3-EWP The K-1700-3 provides a tough and attractive handsfree phone for apartment, and residential door entry or applications requiring a vandal resistant speaker phone. When the “Call” button is pressed, the K-1700-3 returns dial tone. The keypad may then be used to dial any number. If no Touch Tone is entered within 8 seconds, CPC is detected, a busy signal is detected, or the programmable maximum call time has elapsed, the K- 1700-3 will automatically disconnect. Alternatively, the K-1700-3 may be disconnected by pressing the “Call” button again. The K-1700-3 comes complete with a standard, flush mount, rough-in box. In addition, an optional weather resistant, surface mount box is available For outdoor or harsh environments, the K-1700-3 is available with Enhanced Weather Protection (EWP). EWP products feature rubber gaskets and boots, closed cell foam gasketing, hand soldered silicon sealed connections, anti-corrosive gel filled butt connectors, as well as urethane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches.   Description détaillée