-
VIKING ELECTRONICS | C-250 | Entry Phone Controller And Call Router
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : C-250 The C-250 allows single line telephones or a telephone system to share a phone line with a single Viking entry phone. Tenants may answer an entry phone call, converse with the visitor and let them in with a touch tone command. The C-250 also has a built in five number dialer to make an outside call if there is no answer on the inside phone. If the outside call is busy or ring no answer, the C-250 can call up to four more numbers. The C-250 provides a “Call Waiting” tone when the phone line is in use. Tenants may also call out to the entry phone for monitoring purposes. Description détaillée -
VIKING ELECTRONICS | C-4000 | Provides 4 Door Entry Points and Keyless Entry (or Optional Card Readers) for up to 250 Apartments or Offices
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : C-4000 The C-4000 converts any four touch tone phones into multi-number auto dialers that will store up to 250 telephone numbers in non-volatile memory. Use with Viking’s K-1700-3 or K-1900-8 phones to provide vandal resistant handsfree or handset communication from entry points to apartments or offices. When a call initiated by the C-4000 is answered by an apartment or business tenant, a built-in contact closure may be activated to control an electric gate or door strike. Up to 250 entry codes may also be programmed providing tenants with keyless entry or optional PRX-1 Card Readers may be added for proximity card entry. The C-4000 can be programmed locally or remotely using a standard Touch Tone phone. The C-4000 has built-in user dialing restriction to help prevent unauthorized calls and toll fraud. Description détaillée -
VIKING ELECTRONICS | CPC-1 | Generate a CPC Disconnect Signal
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : CPC-1 The CPC-1 will generate a CPC disconnect signal on a PABX analog station (or any other line that does not provide this signal). A CPC (Calling Party Control) signal is a momentary break in phone line loop current, which is used to signal automated telco equipment (ie. voice mail, call sequencers, etc.) the distant party has hung up. Central Office telephone lines typically provide this signal, but Analog PABX stations do not. The CPC-1 will generate a 1 second disconnect when it detects a busy signal, reorder tones (fast busy), return to dial tone, or silence. Description détaillée -
VIKING ELECTRONICS | CTG-1 | Clock Controlled Tone Generator with Day of Week selection and alarm tones
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : CTG-1 Viking's model CTG-1 is a clock controlled tone generator designed to provide accurately timed alert tones or buzzer sounds over an existing paging system. The CTG-1 can be programmed to output single, double or triple alert tones or buzzer sounds with up to 128 events in a 24 hour period. These tone/buzzer sounds are ideal for indicating the start and end of shifts, break times, lunch periods, etc. for factories, schools, or any business requiring an audible indication of specified times. Each day of the week can be programmed to either on or off, allowing you to turn off the alert tones during specific days of the week (weekends, etc.) Description détaillée -
VIKING ELECTRONICS | DNA-510 | Digital Mass Notification Announcer
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : DNA-510 The DNA-510 is a digital mass notification announcer, capable of providing up to 2 minutes of digitally recorded voice emergency instructions and alert tones over your existing paging system. The DNA-510 connects to a phone line, analog phone system station or a phone system’s unused trunk/line input allowing you to securely page, trigger emergency messages and/or alert tones and program the unit from any remote touch tone phone. When activated, the DNA-510 will interrupt any current paging or background music and inject an emergency voice message and/or alert tone over your paging system. A live page can also be announced. The DNA-510 can be programmed to repeat one 2 minute message, two 1 minute messages, four 30 second messages or five 24 second messages. It can also be programmed with 10 different alert tones for emergency mass notification of: evacuation, lock down, severe weather, fire, hazardous material release, tornado, flash flood, terrorist alert, all-clear, etc. Description détaillée -
VIKING ELECTRONICS | DVA-2WA | Promotion On Hold Announcer/Repeater; 7.5 Minutes Record Time; Pre-recorded messages, 2 Watt Amplifier
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : DVA-2WA The DVA-2WA is a digital announcer/recorder with a built in 2 watt amplifier. Designed to provide music and promotion on hold, the DVA-2WA can playback in a continuous loop or alternate between promotions and an auxiliary music source at 2 second to 30 minute intervals. Any number of multiple messages may be recorded. The announcer comes with four professionally pre-recorded promotion on hold pacifier messages, as well as, power supply and cabling for an easy plug and play installation. The output of the DVA-2WA may also be connected directly to loudspeakers with messages repeated in timed intervals or played at the push of a button for museum displays, information booths, point of interest locations, etc. The DVA-2WA’s non-volatile memory eliminates the need for batteries or costly built in tape decks. This provides the convenience of recording at the shop or professional studio and then shipping to the installation site. Description détaillée -
VIKING ELECTRONICS | E-30 | Handsfree Speaker Phone with Dialer
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : E-30 The E-30 handsfree phone is designed to provide quick and reliable handsfree communication and can be connected directly to a C.O. line or analog PABX/KSU station. The E-30 features non-volatile memory, a built in dialer, and intelligent call progress detection for automatic hang-up when the call is completed. The E-30 can be programmed to dial up to 5 different numbers on ring no answer or busy and can be configured to dial these numbers until answered. The E-30-EWP shares all of the features of the E-30 in addition to Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or condensation. EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming. For more information, see DOD# 859 Description détaillée -
VIKING ELECTRONICS | FBI-1A | Anti-Feedback Paging Interface
DEMANDER UN DEVIS à info@ovaltel.caProduct code : FBI-1A
Even the best designed paging systems can experience feedback. Now you can eliminate annoying feedback over your paging speakers with Viking’s model FBI-1A digital antifeedback paging interface.
The FBI-1A utilizes state of the art digital recording technology to record the “live” page from a phone system’s paging port output or unused trunk port. The FBI-1A then immediately plays back the recorded page once or twice (selectable) over the paging system.
Pages of up to 32 seconds can be stored and the FBI-1A automatically adjusts to the page length for faster processing. In addition, the FBI-1A can be programmed to provide pre-page and post-page alert tones.
-
VIKING ELECTRONICS | K-1700-3-EWP | Stainless Steel Handsfree Telephone with Keypad with Enhanced Weather Protection
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : K-1700-3-EWP The K-1700-3 provides a tough and attractive handsfree phone for apartment, and residential door entry or applications requiring a vandal resistant speaker phone. When the “Call” button is pressed, the K-1700-3 returns dial tone. The keypad may then be used to dial any number. If no Touch Tone is entered within 8 seconds, CPC is detected, a busy signal is detected, or the programmable maximum call time has elapsed, the K- 1700-3 will automatically disconnect. Alternatively, the K-1700-3 may be disconnected by pressing the “Call” button again. The K-1700-3 comes complete with a standard, flush mount, rough-in box. In addition, an optional weather resistant, surface mount box is available For outdoor or harsh environments, the K-1700-3 is available with Enhanced Weather Protection (EWP). EWP products feature rubber gaskets and boots, closed cell foam gasketing, hand soldered silicon sealed connections, anti-corrosive gel filled butt connectors, as well as urethane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches. Description détaillée -
VIKING ELECTRONICS | K-1900-3 | Door Entry Dialer
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : K-1900-3 The K-1900-3 converts any touch tone phone into a multi-number auto dialer that will store up to 250 telephone numbers in non-volatile E2 memory. Use with Viking’s K-1700-3 or K-1900-8 phones to provide vandal resistant handsfree or handset communication. When a call initiated by the K-1900-3 is answered by an apartment or business tenant, a built-in contact closure may be activated to control an electric gate or door strike. Up to 250 keyless entry codes may also be programmed, providing tenants with keyless entry. In addition, a master keyless entry code and up to five maintenance codes can be programmed. Calling activity and keyless entry use can be monitored using the log bus data output. The K-1900-3 can be programmed locally or remotely using a standard Touch Tone phone. The K-1900-3 has built-in user dialing restriction to help prevent unauthorized calls and toll fraud. Description détaillée -
VIKING ELECTRONICS | K-1900-5 | Hot-Line Touch Tone Dialer
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : K-1900-5 Why pay the premium of leased or dedicated phone lines? The K-1900-5 will automatically dial a preprogrammed number, of up to 32 digits, whenever an associated telephone is taken off hook. Using nonvolatile E2 memory, the K-1900-5 is telephone line powered and will operate on any loop start central office line or analog PABX/KSU extension. The K-1900-5 is easily programmed remotely or locally using a standard Touch Tone phone. NOTE: This product does not eliminate the possibility of toll fraud! To further protect against fraudulent calls, use with a TR-1 Toll Restrictor (Fax Back Document 705). Description détaillée -
VIKING ELECTRONICS | K-1900-7 | Hot Line Panel Phone
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : K-1900-7 The K-1900-7 panel phone will auto-dial a 1-32 digit programmable phone number each time the handset is lifted. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls. The K-1900-7 housing consists of a heavy gauge stainless steel panel, an armored cable, a heavy duty handset, and an all metal cradle. The K-1900-7 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory. For outdoor or harsh environments, the K-1900-7-EWP is available with Enhanced Weather Protection (EWP). The EWP version includes faceplate, transmitter and receiver gaskets, hand soldered silicon sealed connections, gel-filled butt connectors, as well as a urethane potted circuit board with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming Description détaillée -
Sale!
VIKING ELECTRONICS | LM-1A | Provide Visual Lamp Indication of Message Waiting and Ringing
DEMANDER UN DEVIS à info@ovaltel.caProduct code : LM-1A
The message waiting lamp retrofit kit is compatible with any telephone system with standard DC message waiting voltages ranging from 90VDC to 120 VDC.
The LM-1A is fully modular for quick plug-in installation by non-telephone personnel. The unit’s LED will blink at a steady rate when the message waiting voltage is detected.
The LM-1A will also flicker when the phone rings, helping to reduce noise in quiet areas by providing a convenient visual indication for ringing or message waiting.
Note: The LM-1A is not compatible with any AT&T phone system.
-
VIKING ELECTRONICS | MTG-10 | Multi-Tone Generator
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : MTG-10 The model MTG-10 is a multi-tone generator designed to add multiple contact-controlled audio tones to paging systems or 600 ohm inputs. The MTG-10’s audio input can be connected to any paging source, ie: phone system paging port or background music. When a contact closure is provided to one of the inputs, the paging or background music is faded out and the appropriate tone is generated over the paging system. The siren or the evacuation whoop always have priority and over-ride any other tone being generated. The MTG-10 can also be configured to provide a tone every 15 seconds to notify callers that their conversation is being recorded. Description détaillée -
VIKING ELECTRONICS | PB-100 | Emergency Phone Polling & Diagnos
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : PB-100 The PB-100 hardware and software provides inexpensive PC to Telephony applications on an open source basis and makes it easy to create your own application solutions using standard programming languages such as Microsoft’s Visual Basic®. Applications such as message announcement centers, voice dialers and auto attendants may easily be created to your custom specifications. The PB-100 accepts simple ASCII serial commands to seize the phone line, dial or decode DTMF Touch Tones, watch for busy signal, detect loop status, perform timed hook-switch flashes or hang-up the line. If your PC is equipped with a sound card, the audio ports can also be coupled to the phone line through the PB-100 for voice recording or playing announcements using standard file formats such as .wav files. The PB-100 hardware features a serial port interface, an “AUDIO IN” and “AUDIO OUT” port, an analog C.O. line interface and an analog phone port. Several pre-written applications are included and can be installed for use. In addition, all available source code is provided to allow changes or improvements to existing programs. Description détaillée -
VIKING ELECTRONICS | RC-2A | Control Relay Contacts Remotely
DEMANDER UN DEVIS à info@ovaltel.caProduct code : RC-2A
The RC-2A Remote Controller provides remote relay operation from any standard Touch Tone telephone.
The controller is designed to be installed either locally or remotely. For local installations the RC-2A can be installed in series on any analog communications path, such as analog C.O. lines, analog PABX/KSU stations or Viking’s W-Series Doorboxes. and will passively monitor for Touch Tone commands.
For off-premise applications, the RC-2A will answer analog C.O. lines or PABX/KSU stations after a selectable ring delay. A field programmable access code can also be programmed to prevent unauthorized usage. The RC-2A will then allow remote relay operation. Note: For applications where more than one relay closure is required, the RC-3 is available
-
VIKING ELECTRONICS | RG-10A | Ring Booster
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : RG-10A The RG-10A ring generator is designed to increase ringing power of an existing telephone line, analog PABX extension, analog ISDN Terminal Adapter port, or any other telecom device which provides ringing. The RG-10A duplicates the incoming ring frequency and cadence allowing it to be compatible with custom ringing features. The RG-10A is capable of ringing twelve standard (1 REN) telephone devices and does not affect the normal operation of the telephone line or features provided by the phone company such as "Caller ID" and "Call Waiting." Description détaillée -
VIKING ELECTRONICS | SRC-1 | Secure Relay Controller
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : SRC-1 The SRC-1 enables a standard touch tone phone to securely operate a set of timed relay contacts to control a doorstrike or gate controller at a remote location. The SRC-1 is fully user programmable and uses non-volatile memory. The SRC-1 eliminates the possibility of dialing the activation code through the entry phone using a hand held touch tone dialer. The SRC-1 features a switchable 32V talk battery to allow use with any of Viking’s entry phones (E Series), doorboxes (W Series) or hot-line/panel phones (K Series). The SRC-1 is installed between the entry phone and the secure phone, and will reject touch tones from the entry phone and only operate the relay if the correct activation code (user programmable) is given from the secure phone. The SRC-1 also provides up to 32 keyless entry codes to operate the relay from the entry phone with 1 to 6 digits. This feature can be disabled in programming for increased security. Description détaillée -
VOXPRIME | MGT-7050W | 50 Watts Attenuator
Demandez un devis - info@ovaltel.caProduct code : MGT-7050W
- Decora® style bone
- 70 volt 50 watts
- ABS plastic knob
- 10 step attenuation for high level audio signal
- Total attenuation at 33dB
- Low insertion loss
- Controls 8 OHM of speaker load
- Handles 70V input
- Dual face plates (both white and beige supplied)
-
VOXPRIME | MGT-7050W | 50 Watts Attenuator
Demandez un devis - info@ovaltel.caProduct code : MGT-7050W
- Decora® style bone
- 70 volt 50 watts
- ABS plastic knob
- 10 step attenuation for high level audio signal
- Total attenuation at 33dB
- Low insertion loss
- Controls 8 OHM of speaker load
- Handles 70V input
- Dual face plates (both white and beige supplied)
- Easy Installation
-
VOXPRIME | VOX-100+| Full-Featured Wall Mount 70V Telephone Paging Amplifier – 100W
Demandez un devis - info@ovaltel.caProduct code : VOX-100+
The VOX-100+ is a real full-featured wall-mounted 100W telephone paging amplifier designed to reduce installation costs and complexity.
It has all the required features to eliminate the need for expensive and complex external modules such as Telephone Access Module, Zone Paging Module, Master Clock, MP3 Player, Digital Feedback Terminator, Messaging System and FM Receiver.
Included items:
- FM Antenna
- Master Clock Battery
- MicroSD Card
Product Manual Brochure Installation GuideNote: Paperback product manual not included. Can be downloaded or printed if required.
-
VOXPRIME | VOX-100+| Full-Featured wall-mounted 100W Telephone Paging Amplifier
Demandez un devis - info@ovaltel.caProduct code : VOX-100+
The VOX-100+ is a real full-featured wall-mounted 100W telephone paging amplifier designed to reduce installation costs and complexity.
It has all the required features to eliminate the need for expensive and complex external modules such as Telephone Access Module, Zone Paging Module, Master Clock, MP3 Player, Digital Feedback Terminator, Messaging System and FM Receiver.
Included items:
- FM Antenna
- Master Clock Battery
- MicroSD Card
-
VOXPRIME | VOX-15AT | Indoor/Outdoor All-Metal Horn Speaker (15 Watts)
Demandez un devis - info@ovaltel.caProduct code : VOX-15AT
- ap settings for 70V : 0.9 / 1.8 / 7.5 / 15 watts
- Tap settings for 25V : 0.48 / 0.9 / 1.8 watts
- Weatherproof, all-metal construction
- Beige enamel finish
- Swivel bracket
-
VOXPRIME | VOX-30 | Wall-mounted 30W Telephone Paging Amplifier with Night Ringer
Demandez un devis - info@ovaltel.caProcuct code : VOX-30
The VOX-30 is one of the most cost-effective telephone paging amplifier in its category. It has all the required features for basic installations such as the night ringer. It is the perfect solution for small installations.
-
VOXPRIME | VOX-30AT | Indoor/Outdoor All-Metal Horn Speaker (30 Watts)
Demandez un devis - info@ovaltel.caProduct code : VOX-30AT
- Tap settings for 70V : 1.8 / 3.7 / 7.5 / 15 / 30 watts
- Tap settings for 25V : 1.8 / 3.7 / 7 / 15 watts
- Weatherproof, all-metal construction
- Beige enamel finish
- Swivel bracket
-
VOXPRIME | VOX-AT100S | 100 Watts Attenuator – Stainless
Demandez un devis - info@ovaltel.caProduct code : VOX-AT100S
The VOX-AT100S is a UL Listed, single-gang, 100W, ten-step, continuous rotary, audio level attenuator with an OFF position. Stainless steel faceplate with embossed positions and a black knob.
Intended Use – Indoor Environment
- Primary Use – Attenuates audio power to any number of loudspeakers, up to 100W load. For use with 25V or 70V distributed audio systems.
- UL Listed 813 Commercial Audio Equipment – When installed in accordance with supplied instructions and connected to supply circuits in accordance with ANSI/NFPA70, NEC, and AHJ.
- Installation – Single-gang electrical box, 2-1/8”D
Audio Specifications
- Power Rating – 100W Continuous
- Attenuation (Ref: 25V, 70.7V line) – Position 10: Full Signal Position 9-3:-3 dB each Positions 2-1:-6 dB each Position 0: No Signal
- Insertion Loss – <0.5 dB
- Audio Connection – 10” long, pre-cut, color coded leads
-
VOXPRIME | VOX-CAGE | Stainless Steel Cage Protector
Demandez un devis - info@ovaltel.caProduct code : VOX-RMKCAGE
- Chrome Plated Stainless Steel
- 16” L x 16” W x 14” H
-
VOXPRIME | VOX-CS8STG | 8” Full range Ceiling Speaker
Demandez un devis - info@ovaltel.caProduct code : VOX-CS8STG
- 8 Ohm with 70V/25V Transformer built-in (Taps: 5W / 2.5W / 1W / 0.5W / 0.25W)
- 8" dual cone speaker
- 12" white steel grille
Optional Accessories :
- VOX-CSTB - Ceiling Speaker T-Bar Support
- VOX-CSBB - Ceiling Speaker Back Box
-
VOXPRIME | VOX-CSBB | Ceiling Speaker Back Box
Demandez un devis - info@ovaltel.caProduct code : VOX-CSBB
- For use with VOX-CS8STG
- Foam insert for improved audio quality
- Conduit knockouts
-
VOXPRIME | VOX-CSTB | Ceiling Speaker T-Bar Support
Demandez un devis - info@ovaltel.caProduct code : VOX-CSTB
- Our Speaker T-Bar support are used to prevent sagging on drop ceiling tiles.
- For use with the VOX-CS8STG Speaker.
-
VOXPRIME | VOX-E| VOX-100+ Ethernet Module
Demandez un devis - info@ovaltel.caProduct code : VOX-E
The VOX-E Ethernet Module connects the VOX-100+ amplifier to the Internet via an Ethernet connection allowing SIP Paging and remote configuration of the VOX-E & VOX-100+ settings.
Key Features:
- 10/100 Ethernet port
- SIP Paging & SIP Night Ringer
- Internet Radio
- Time Synchronization over Internet
- VOX-100+ Internet Remote Access & Configuration
- Remote Upload of Songs, Tones & Messages
-
VOXPRIME | VOX-FCS6T | 6” Full range Ceiling Speaker
Demandez un devis - info@ovaltel.caProduct code : VOX-FCS6T
- 8 Ohm with 70V/25V Transformer built-in (Taps: 5W / 2.5W / 1W / 0.5W / 0.25W)
- 6" dual cone speaker
- Steel Grille
- Dog-ear mounting clamps for secure installation
-
VOXPRIME | VOX-FCS8T | 8” Full Range Ceiling Speaker
Demandez un devis - info@ovaltel.caProduct code : VOX-FCS8T
- 8 Ohm with 70V/25V Transformer built-in (Taps: 5W / 2.5W / 1W / 0.5W / 0.25W)
- 8" dual cone speaker
- Steel Grille
- Dog-ear mounting clamps for secure installation
-
VOXPRIME | VOX-HFMW5 | 5.25″ Indoor Wall Mount Speaker
Demandez un devis - info@ovaltel.caProduct code : VOX-HFMW5
- 6W / 3W / 1.5W 70V transformer with screw terminal
- Frequency Range: 150 Hz - 17 kHz
- Steel Grille
- Dimensions:11" H x 8" W x 3.5'' D
-
VOXPRIME | VOX-HFMW8 | 8″ Indoor or Protected Outdoor Full Range Wall Mount Speaker
Demandez un devis - info@ovaltel.caProduct code : VOX-HFMW8
- 8 Ohm with 70V/25V Transformer built-in (5W / 2.5W / 1.25W / 0.63W / 0.31W)
- Dual Cone 8'' Loudspeaker
- Steel Grille with a slanted steel surface mount enclosure
- White powder coat finish
-
VOXPRIME | VOX-RMK | Amplifier Rack Mount Kit – 5RU
Demandez un devis - info@ovaltel.caProduct code : VOX-RMK
- Our amplifiers are designed for wall-mount applications, but can also be mounted on a standard 19″ rack using our rack adapter brackets.
