-
VIKING ELECTRONICS | PB-100 | Emergency Phone Polling & Diagnos
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : PB-100 The PB-100 hardware and software provides inexpensive PC to Telephony applications on an open source basis and makes it easy to create your own application solutions using standard programming languages such as Microsoft’s Visual Basic®. Applications such as message announcement centers, voice dialers and auto attendants may easily be created to your custom specifications. The PB-100 accepts simple ASCII serial commands to seize the phone line, dial or decode DTMF Touch Tones, watch for busy signal, detect loop status, perform timed hook-switch flashes or hang-up the line. If your PC is equipped with a sound card, the audio ports can also be coupled to the phone line through the PB-100 for voice recording or playing announcements using standard file formats such as .wav files. The PB-100 hardware features a serial port interface, an “AUDIO IN” and “AUDIO OUT” port, an analog C.O. line interface and an analog phone port. Several pre-written applications are included and can be installed for use. In addition, all available source code is provided to allow changes or improvements to existing programs. Description détaillée -
VOXPRIME | VOX-AT100S | 100 Watts Attenuator – Stainless
Demandez un devis - info@ovaltel.caProduct code : VOX-AT100S
The VOX-AT100S is a UL Listed, single-gang, 100W, ten-step, continuous rotary, audio level attenuator with an OFF position. Stainless steel faceplate with embossed positions and a black knob.
Intended Use – Indoor Environment
- Primary Use – Attenuates audio power to any number of loudspeakers, up to 100W load. For use with 25V or 70V distributed audio systems.
- UL Listed 813 Commercial Audio Equipment – When installed in accordance with supplied instructions and connected to supply circuits in accordance with ANSI/NFPA70, NEC, and AHJ.
- Installation – Single-gang electrical box, 2-1/8”D
Audio Specifications
- Power Rating – 100W Continuous
- Attenuation (Ref: 25V, 70.7V line) – Position 10: Full Signal Position 9-3:-3 dB each Positions 2-1:-6 dB each Position 0: No Signal
- Insertion Loss – <0.5 dB
- Audio Connection – 10” long, pre-cut, color coded leads
-
Cisco 7945G
DEMANDER UN DEVIS à info@ovaltel.caThe Cisco Unified IP Phone 7941 Series online tutorial is a self-directed training module that demonstrates most phone features and functions of the Unified IP Phone 7945G. The downloadable version allows you to customize the tutorial according to the specific features that your company uses.
Improve the telephone user experience with new high-fidelity wideband audio, backlit color displays, and navigation options. The Cisco Unified IP Phone 7945G extends the functionality of the existing Cisco Unified IP Phone 7941G/7941G-GE models with the following features:
- High-fidelity wideband audio for vibrant, lifelike conversations; Internet Low Bitrate Codec (iLBC) support for use in lossy networks
- Large backlit color display for easy use of Cisco Unified Communications and third-party telephone applications
- Improved navigation cluster for easier navigation and feature and function selection
- Gigabit Ethernet connectivity
-
NORTEL NORSTAR | NTAB1265 | Expansion Card 2 ports for Flashtalk refurbished
DEMANDER UN DEVIS à info@ovaltel.caProduct code : NTAB1265
-
VIKING ELECTRONICS | K-1900-7 | Hot Line Panel Phone
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : K-1900-7 The K-1900-7 panel phone will auto-dial a 1-32 digit programmable phone number each time the handset is lifted. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls. The K-1900-7 housing consists of a heavy gauge stainless steel panel, an armored cable, a heavy duty handset, and an all metal cradle. The K-1900-7 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory. For outdoor or harsh environments, the K-1900-7-EWP is available with Enhanced Weather Protection (EWP). The EWP version includes faceplate, transmitter and receiver gaskets, hand soldered silicon sealed connections, gel-filled butt connectors, as well as a urethane potted circuit board with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming Description détaillée -
NORTEL NORSTAR | NT7B53 | KSU Modular ICS 0 x 32
DEMANDER UN DEVIS à info@ovaltel.ca -
YEALINK | SIP-T46G| Ultra-elegant Gigabit IP Phone
DEMANDER UN DEVIS à info@ovaltel.ca- Dual-port Gigabit Ethernet
- 4.3″ 480 x 272-pixel color display with backlight
- Built-in a USB port, support Bluetooth headset(Through USB Dongle)
- Up to 6 SIP accounts
Product code :
SIP-T46G
-
VOXPRIME | VOX-CSBB | Ceiling Speaker Back Box
Demandez un devis - info@ovaltel.caProduct code : VOX-CSBB
- For use with VOX-CS8STG
- Foam insert for improved audio quality
- Conduit knockouts
-
AVAYA | 9641G | IP Deskphone
DEMANDER UN DEVIS à info@ovaltel.ca• Touch Screen Color Display (4.1" x 2.3")
• Adjustable Tilt Display
• Dual Gigabit Ethernet (10/100/1000)
• Configurable line appearance & feature key buttons
• Speaker, Mute, Volume, Headset, Contacts, Home, History, Message, Forwarding & Phone buttons
• Separate Volume for handset, speaker, ringer & headset
• Red LED for speaker, mute, headset, message & history
• 24 Admin buttons with 5 lines displayed
• 2 message waiting indicators
• 360 degree visual alert for MW & incoming calls
• Desktop or wall mount (included)
• Bluetooth & DECT headset support w/ adapter
• PoE 802.3af class 2 device
• Avaya Flare Experience in SIP modeProduct code :
9641G
-
NORTEL NORSTAR | NT8B14 | M7100 telephone refurbished
DEMANDER UN DEVIS à info@ovaltel.caProduct code : NT8B14
-
VIKING ELECTRONICS | DNA-510 | Digital Mass Notification Announcer
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : DNA-510 The DNA-510 is a digital mass notification announcer, capable of providing up to 2 minutes of digitally recorded voice emergency instructions and alert tones over your existing paging system. The DNA-510 connects to a phone line, analog phone system station or a phone system’s unused trunk/line input allowing you to securely page, trigger emergency messages and/or alert tones and program the unit from any remote touch tone phone. When activated, the DNA-510 will interrupt any current paging or background music and inject an emergency voice message and/or alert tone over your paging system. A live page can also be announced. The DNA-510 can be programmed to repeat one 2 minute message, two 1 minute messages, four 30 second messages or five 24 second messages. It can also be programmed with 10 different alert tones for emergency mass notification of: evacuation, lock down, severe weather, fire, hazardous material release, tornado, flash flood, terrorist alert, all-clear, etc. Description détaillée -
VOXPRIME | VOX-CSTB | Ceiling Speaker T-Bar Support
Demandez un devis - info@ovaltel.caProduct code : VOX-CSTB
- Our Speaker T-Bar support are used to prevent sagging on drop ceiling tiles.
- For use with the VOX-CS8STG Speaker.