Viking

Voir le panier “VIKING ELECTRONICS | C-4000 | Provides 4 Door Entry Points and Keyless Entry (or Optional Card Readers) for up to 250 Apartments or Offices” has been added to your cart.
  • K-1900-7

    VIKING ELECTRONICS | K-1900-7 | Hot Line Panel Phone

    DEMANDER UN DEVIS à info@ovaltel.ca

    Code de produit : K-1900-7

    The K-1900-7 panel phone will auto-dial a 1-32 digit programmable phone number each time the handset is lifted. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls.

    The K-1900-7 housing consists of a heavy gauge stainless steel panel, an armored cable, a heavy duty handset, and an all metal cradle. The K-1900-7 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory.

    For outdoor or harsh environments, the K-1900-7-EWP is available with Enhanced Weather Protection (EWP). The EWP version includes faceplate, transmitter and receiver gaskets, hand soldered silicon sealed connections, gel-filled butt connectors, as well as a urethane potted circuit board with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming

     

    Description détaillée

  • VIK-DVA-2WA
    Code de produit : DVA-2WA The DVA-2WA is a digital announcer/recorder with a built in 2 watt amplifier. Designed to provide music and promotion on hold, the DVA-2WA can playback in a continuous loop or alternate between promotions and an auxiliary music source at 2 second to 30 minute intervals. Any number of multiple messages may be recorded. The announcer comes with four professionally pre-recorded promotion on hold pacifier messages, as well as, power supply and cabling for an easy plug and play installation. The output of the DVA-2WA may also be connected directly to loudspeakers with messages repeated in timed intervals or played at the push of a button for museum displays, information booths, point of interest locations, etc. The DVA-2WA’s non-volatile memory eliminates the need for batteries or costly built in tape decks. This provides the convenience of recording at the shop or professional studio and then shipping to the installation site.   Description détaillée
  • MTG-10

    VIKING ELECTRONICS | MTG-10 | Multi-Tone Generator

    DEMANDER UN DEVIS à info@ovaltel.ca

    Product code : MTG-10

    The model MTG-10 is a multi-tone generator designed to add multiple contact-controlled audio tones to paging systems or 600 ohm inputs.

    The MTG-10’s audio input can be connected to any paging source, ie: phone system paging port or background music. When a contact closure is provided to one of the inputs, the paging or background music is faded out and the appropriate tone is generated over the paging system. The siren or the evacuation whoop always have priority and over-ride any other tone being generated.

    The MTG-10 can also be configured to provide a tone every 15 seconds to notify callers that their conversation is being recorded.

     

    Detailed description

  • VIK-DNA-510
    Code de produit : DNA-510 The DNA-510 is a digital mass notification announcer, capable of providing up to 2 minutes of digitally recorded voice emergency instructions and alert tones over your existing paging system. The DNA-510 connects to a phone line, analog phone system station or a phone system’s unused trunk/line input allowing you to securely page, trigger emergency messages and/or alert tones and program the unit from any remote touch tone phone. When activated, the DNA-510 will interrupt any current paging or background music and inject an emergency voice message and/or alert tone over your paging system. A live page can also be announced. The DNA-510 can be programmed to repeat one 2 minute message, two 1 minute messages, four 30 second messages or five 24 second messages. It can also be programmed with 10 different alert tones for emergency mass notification of: evacuation, lock down, severe weather, fire, hazardous material release, tornado, flash flood, terrorist alert, all-clear, etc.   Description détaillée
  • 61hQh0pcuSL._SL1200_

    VIKING ELECTRONICS | RG-10A | Ring Booster

    DEMANDER UN DEVIS à info@ovaltel.ca

    Code de produit : RG-10A

    The RG-10A ring generator is designed to increase ringing power of an existing telephone line, analog PABX extension, analog ISDN Terminal Adapter port, or any other telecom device which provides ringing.

    The RG-10A duplicates the incoming ring frequency and cadence allowing it to be compatible with custom ringing features.

    The RG-10A is capable of ringing twelve standard (1 REN) telephone devices and does not affect the normal operation of the telephone line or features provided by the phone company such as « Caller ID » and « Call Waiting. »

     

    Description détaillée

  • VIK-C-250
    Code de produit : C-250 The C-250 allows single line telephones or a telephone system to share a phone line with a single Viking entry phone. Tenants may answer an entry phone call, converse with the visitor and let them in with a touch tone command. The C-250 also has a built in five number dialer to make an outside call if there is no answer on the inside phone. If the outside call is busy or ring no answer, the C-250 can call up to four more numbers. The C-250 provides a “Call Waiting” tone when the phone line is in use. Tenants may also call out to the entry phone for monitoring purposes.   Description détaillée
  • src-1a

    VIKING ELECTRONICS | SRC-1 | Secure Relay Controller

    DEMANDER UN DEVIS à info@ovaltel.ca

    Product code : SRC-1

    The SRC-1 enables a standard touch tone phone to securely operate a set of timed relay contacts to control a doorstrike or gate controller at a remote location. The SRC-1 is fully user programmable and uses non-volatile memory. The SRC-1 eliminates the possibility of dialing the activation code through the entry phone using a hand held touch tone dialer.

    The SRC-1 features a switchable 32V talk battery to allow use with any of Viking’s entry phones (E Series), doorboxes (W Series) or hot-line/panel phones (K Series).

    The SRC-1 is installed between the entry phone and the secure phone, and will reject touch tones from the entry phone and only operate the relay if the correct activation code (user programmable) is given from the secure phone.

    The SRC-1 also provides up to 32 keyless entry codes to operate the relay from the entry phone with 1 to 6 digits. This feature can be disabled in programming for increased security.

     

    Detailed description