-
VIKING ELECTRONICS | AES-2000S | ADA Compliant Multi-Tenant Entry System with Voice/LCD Assis
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : AES-2000S The AES-2000 Accessible Entry system provides voice messages and help instructions to assist people with various disabilities. The large .5 inch high character display shows the directory of the people in the building, and also displays directions and message prompts. A built in voice recorder can also provide a verbal message. If the EZ Access button is pressed, information on how to use the system is displayed and announced. The built in directory can handle up to 525 names and phone numbers. Once an apartment is selected, the AES-2000 dials the pre-programmed apartment phone number and provides two way communication. If the proper Touch Tone command is entered at the apartment phone, a door strike can be activated. The AES-2000 will also support keyless entry at the door via its built-in keypad, or by adding Wiegand-type proximity card readers, such as the Viking PRX-1. The AES-2000 is available as a surface mount (AES-2000S) and as a flush mount (AES-2000F). Description détaillée -
VIKING ELECTRONICS | K-1900-5 | Hot-Line Touch Tone Dialer
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : K-1900-5
Why pay the premium of leased or dedicated phone lines?
The K-1900-5 will automatically dial a preprogrammed number, of up to 32 digits, whenever an associated telephone is taken off hook. Using nonvolatile E2 memory, the K-1900-5 is telephone line powered and will operate on any loop start central office line or analog PABX/KSU extension.
The K-1900-5 is easily programmed remotely or locally using a standard Touch Tone phone.
NOTE: This product does not eliminate the possibility of toll fraud! To further protect against fraudulent calls, use with a TR-1 Toll Restrictor (Fax Back Document 705).
-
VIKING ELECTRONICS | PB-100 | Emergency Phone Polling & Diagnos
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : PB-100 The PB-100 hardware and software provides inexpensive PC to Telephony applications on an open source basis and makes it easy to create your own application solutions using standard programming languages such as Microsoft’s Visual Basic®. Applications such as message announcement centers, voice dialers and auto attendants may easily be created to your custom specifications. The PB-100 accepts simple ASCII serial commands to seize the phone line, dial or decode DTMF Touch Tones, watch for busy signal, detect loop status, perform timed hook-switch flashes or hang-up the line. If your PC is equipped with a sound card, the audio ports can also be coupled to the phone line through the PB-100 for voice recording or playing announcements using standard file formats such as .wav files. The PB-100 hardware features a serial port interface, an “AUDIO IN” and “AUDIO OUT” port, an analog C.O. line interface and an analog phone port. Several pre-written applications are included and can be installed for use. In addition, all available source code is provided to allow changes or improvements to existing programs. Description détaillée -
VIKING ELECTRONICS | K-1900-7 | Hot Line Panel Phone
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : K-1900-7
The K-1900-7 panel phone will auto-dial a 1-32 digit programmable phone number each time the handset is lifted. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls.
The K-1900-7 housing consists of a heavy gauge stainless steel panel, an armored cable, a heavy duty handset, and an all metal cradle. The K-1900-7 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory.
For outdoor or harsh environments, the K-1900-7-EWP is available with Enhanced Weather Protection (EWP). The EWP version includes faceplate, transmitter and receiver gaskets, hand soldered silicon sealed connections, gel-filled butt connectors, as well as a urethane potted circuit board with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming
-
VIKING ELECTRONICS | DVA-2WA | Promotion On Hold Announcer/Repeater; 7.5 Minutes Record Time; Pre-recorded messages, 2 Watt Amplifier
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : DVA-2WA The DVA-2WA is a digital announcer/recorder with a built in 2 watt amplifier. Designed to provide music and promotion on hold, the DVA-2WA can playback in a continuous loop or alternate between promotions and an auxiliary music source at 2 second to 30 minute intervals. Any number of multiple messages may be recorded. The announcer comes with four professionally pre-recorded promotion on hold pacifier messages, as well as, power supply and cabling for an easy plug and play installation. The output of the DVA-2WA may also be connected directly to loudspeakers with messages repeated in timed intervals or played at the push of a button for museum displays, information booths, point of interest locations, etc. The DVA-2WA’s non-volatile memory eliminates the need for batteries or costly built in tape decks. This provides the convenience of recording at the shop or professional studio and then shipping to the installation site. Description détaillée -
VIKING ELECTRONICS | MTG-10 | Multi-Tone Generator
DEMANDER UN DEVIS à info@ovaltel.caProduct code : MTG-10
The model MTG-10 is a multi-tone generator designed to add multiple contact-controlled audio tones to paging systems or 600 ohm inputs.
The MTG-10’s audio input can be connected to any paging source, ie: phone system paging port or background music. When a contact closure is provided to one of the inputs, the paging or background music is faded out and the appropriate tone is generated over the paging system. The siren or the evacuation whoop always have priority and over-ride any other tone being generated.
The MTG-10 can also be configured to provide a tone every 15 seconds to notify callers that their conversation is being recorded.
-
VIKING ELECTRONICS | DNA-510 | Digital Mass Notification Announcer
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : DNA-510 The DNA-510 is a digital mass notification announcer, capable of providing up to 2 minutes of digitally recorded voice emergency instructions and alert tones over your existing paging system. The DNA-510 connects to a phone line, analog phone system station or a phone system’s unused trunk/line input allowing you to securely page, trigger emergency messages and/or alert tones and program the unit from any remote touch tone phone. When activated, the DNA-510 will interrupt any current paging or background music and inject an emergency voice message and/or alert tone over your paging system. A live page can also be announced. The DNA-510 can be programmed to repeat one 2 minute message, two 1 minute messages, four 30 second messages or five 24 second messages. It can also be programmed with 10 different alert tones for emergency mass notification of: evacuation, lock down, severe weather, fire, hazardous material release, tornado, flash flood, terrorist alert, all-clear, etc. Description détaillée -
VIKING ELECTRONICS | RG-10A | Ring Booster
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : RG-10A
The RG-10A ring generator is designed to increase ringing power of an existing telephone line, analog PABX extension, analog ISDN Terminal Adapter port, or any other telecom device which provides ringing.
The RG-10A duplicates the incoming ring frequency and cadence allowing it to be compatible with custom ringing features.
The RG-10A is capable of ringing twelve standard (1 REN) telephone devices and does not affect the normal operation of the telephone line or features provided by the phone company such as « Caller ID » and « Call Waiting. »
-
VIKING ELECTRONICS | C-250 | Entry Phone Controller And Call Router
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : C-250 The C-250 allows single line telephones or a telephone system to share a phone line with a single Viking entry phone. Tenants may answer an entry phone call, converse with the visitor and let them in with a touch tone command. The C-250 also has a built in five number dialer to make an outside call if there is no answer on the inside phone. If the outside call is busy or ring no answer, the C-250 can call up to four more numbers. The C-250 provides a “Call Waiting” tone when the phone line is in use. Tenants may also call out to the entry phone for monitoring purposes. Description détaillée -
VIKING ELECTRONICS | SRC-1 | Secure Relay Controller
DEMANDER UN DEVIS à info@ovaltel.caProduct code : SRC-1
The SRC-1 enables a standard touch tone phone to securely operate a set of timed relay contacts to control a doorstrike or gate controller at a remote location. The SRC-1 is fully user programmable and uses non-volatile memory. The SRC-1 eliminates the possibility of dialing the activation code through the entry phone using a hand held touch tone dialer.
The SRC-1 features a switchable 32V talk battery to allow use with any of Viking’s entry phones (E Series), doorboxes (W Series) or hot-line/panel phones (K Series).
The SRC-1 is installed between the entry phone and the secure phone, and will reject touch tones from the entry phone and only operate the relay if the correct activation code (user programmable) is given from the secure phone.
The SRC-1 also provides up to 32 keyless entry codes to operate the relay from the entry phone with 1 to 6 digits. This feature can be disabled in programming for increased security.
-
VIKING ELECTRONICS | CPC-1 | Generate a CPC Disconnect Signal
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : CPC-1 The CPC-1 will generate a CPC disconnect signal on a PABX analog station (or any other line that does not provide this signal). A CPC (Calling Party Control) signal is a momentary break in phone line loop current, which is used to signal automated telco equipment (ie. voice mail, call sequencers, etc.) the distant party has hung up. Central Office telephone lines typically provide this signal, but Analog PABX stations do not. The CPC-1 will generate a 1 second disconnect when it detects a busy signal, reorder tones (fast busy), return to dial tone, or silence. Description détaillée -
VIKING ELECTRONICS | C-4000 | Provides 4 Door Entry Points and Keyless Entry (or Optional Card Readers) for up to 250 Apartments or Offices
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : C-4000 The C-4000 converts any four touch tone phones into multi-number auto dialers that will store up to 250 telephone numbers in non-volatile memory. Use with Viking’s K-1700-3 or K-1900-8 phones to provide vandal resistant handsfree or handset communication from entry points to apartments or offices. When a call initiated by the C-4000 is answered by an apartment or business tenant, a built-in contact closure may be activated to control an electric gate or door strike. Up to 250 entry codes may also be programmed providing tenants with keyless entry or optional PRX-1 Card Readers may be added for proximity card entry. The C-4000 can be programmed locally or remotely using a standard Touch Tone phone. The C-4000 has built-in user dialing restriction to help prevent unauthorized calls and toll fraud. Description détaillée
