-
VIKING ELECTRONICS | RC-2A | Control Relay Contacts Remotely
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : RC-2A The RC-2A Remote Controller provides remote relay operation from any standard Touch Tone telephone. The controller is designed to be installed either locally or remotely. For local installations the RC-2A can be installed in series on any analog communications path, such as analog C.O. lines, analog PABX/KSU stations or Viking’s W-Series Doorboxes. and will passively monitor for Touch Tone commands. For off-premise applications, the RC-2A will answer analog C.O. lines or PABX/KSU stations after a selectable ring delay. A field programmable access code can also be programmed to prevent unauthorized usage. The RC-2A will then allow remote relay operation. Note: For applications where more than one relay closure is required, the RC-3 is available Description détaillée -
VIKING ELECTRONICS | E-30 | Handsfree Speaker Phone with Dialer
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : E-30 The E-30 handsfree phone is designed to provide quick and reliable handsfree communication and can be connected directly to a C.O. line or analog PABX/KSU station. The E-30 features non-volatile memory, a built in dialer, and intelligent call progress detection for automatic hang-up when the call is completed. The E-30 can be programmed to dial up to 5 different numbers on ring no answer or busy and can be configured to dial these numbers until answered. The E-30-EWP shares all of the features of the E-30 in addition to Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or condensation. EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming. For more information, see DOD# 859 Description détaillée -
Sale!
VIKING ELECTRONICS | LM-1A | Provide Visual Lamp Indication of Message Waiting and Ringing
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : LM-1A The message waiting lamp retrofit kit is compatible with any telephone system with standard DC message waiting voltages ranging from 90VDC to 120 VDC. The LM-1A is fully modular for quick plug-in installation by non-telephone personnel. The unit’s LED will blink at a steady rate when the message waiting voltage is detected. The LM-1A will also flicker when the phone rings, helping to reduce noise in quiet areas by providing a convenient visual indication for ringing or message waiting. Note: The LM-1A is not compatible with any AT&T phone system. Description détaillée -
VIKING ELECTRONICS | K-1700-3-EWP | Stainless Steel Handsfree Telephone with Keypad with Enhanced Weather Protection
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : K-1700-3-EWP
The K-1700-3 provides a tough and attractive handsfree phone for apartment, and residential door entry or applications requiring a vandal resistant speaker phone.
When the “Call” button is pressed, the K-1700-3 returns dial tone. The keypad may then be used to dial any number. If no Touch Tone is entered within 8 seconds, CPC is detected, a busy signal is detected, or the programmable maximum call time has elapsed, the K- 1700-3 will automatically disconnect. Alternatively, the K-1700-3 may be disconnected by pressing the “Call” button again. The K-1700-3 comes complete with a standard, flush mount, rough-in box. In addition, an optional weather resistant, surface mount box is available
For outdoor or harsh environments, the K-1700-3 is available with Enhanced Weather Protection (EWP). EWP products feature rubber gaskets and boots, closed cell foam gasketing, hand soldered silicon sealed connections, anti-corrosive gel filled butt connectors, as well as urethane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches.
-
VIKING ELECTRONICS | FBI-1A | Anti-Feedback Paging Interface
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : FBI-1A Even the best designed paging systems can experience feedback. Now you can eliminate annoying feedback over your paging speakers with Viking’s model FBI-1A digital antifeedback paging interface. The FBI-1A utilizes state of the art digital recording technology to record the “live” page from a phone system’s paging port output or unused trunk port. The FBI-1A then immediately plays back the recorded page once or twice (selectable) over the paging system. Pages of up to 32 seconds can be stored and the FBI-1A automatically adjusts to the page length for faster processing. In addition, the FBI-1A can be programmed to provide pre-page and post-page alert tones. Description détaillée -
VIKING ELECTRONICS | K-1900-3 | Door Entry Dialer
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : K-1900-3
The K-1900-3 converts any touch tone phone into a multi-number auto dialer that will store up to 250 telephone numbers in non-volatile E2 memory. Use with Viking’s K-1700-3 or K-1900-8 phones to provide vandal resistant handsfree or handset communication.
When a call initiated by the K-1900-3 is answered by an apartment or business tenant, a built-in contact closure may be activated to control an electric gate or door strike. Up to 250 keyless entry codes may also be programmed, providing tenants with keyless entry.
In addition, a master keyless entry code and up to five maintenance codes can be programmed. Calling activity and keyless entry use can be monitored using the log bus data output. The K-1900-3 can be programmed locally or remotely using a standard Touch Tone phone. The K-1900-3 has built-in user dialing restriction to help prevent unauthorized calls and toll fraud.
-
VIKING ELECTRONICS | AES-2000S | ADA Compliant Multi-Tenant Entry System with Voice/LCD Assis
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : AES-2000S The AES-2000 Accessible Entry system provides voice messages and help instructions to assist people with various disabilities. The large .5 inch high character display shows the directory of the people in the building, and also displays directions and message prompts. A built in voice recorder can also provide a verbal message. If the EZ Access button is pressed, information on how to use the system is displayed and announced. The built in directory can handle up to 525 names and phone numbers. Once an apartment is selected, the AES-2000 dials the pre-programmed apartment phone number and provides two way communication. If the proper Touch Tone command is entered at the apartment phone, a door strike can be activated. The AES-2000 will also support keyless entry at the door via its built-in keypad, or by adding Wiegand-type proximity card readers, such as the Viking PRX-1. The AES-2000 is available as a surface mount (AES-2000S) and as a flush mount (AES-2000F). Description détaillée -
VIKING ELECTRONICS | K-1900-5 | Hot-Line Touch Tone Dialer
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : K-1900-5
Why pay the premium of leased or dedicated phone lines?
The K-1900-5 will automatically dial a preprogrammed number, of up to 32 digits, whenever an associated telephone is taken off hook. Using nonvolatile E2 memory, the K-1900-5 is telephone line powered and will operate on any loop start central office line or analog PABX/KSU extension.
The K-1900-5 is easily programmed remotely or locally using a standard Touch Tone phone.
NOTE: This product does not eliminate the possibility of toll fraud! To further protect against fraudulent calls, use with a TR-1 Toll Restrictor (Fax Back Document 705).
-
VIKING ELECTRONICS | PB-100 | Emergency Phone Polling & Diagnos
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : PB-100 The PB-100 hardware and software provides inexpensive PC to Telephony applications on an open source basis and makes it easy to create your own application solutions using standard programming languages such as Microsoft’s Visual Basic®. Applications such as message announcement centers, voice dialers and auto attendants may easily be created to your custom specifications. The PB-100 accepts simple ASCII serial commands to seize the phone line, dial or decode DTMF Touch Tones, watch for busy signal, detect loop status, perform timed hook-switch flashes or hang-up the line. If your PC is equipped with a sound card, the audio ports can also be coupled to the phone line through the PB-100 for voice recording or playing announcements using standard file formats such as .wav files. The PB-100 hardware features a serial port interface, an “AUDIO IN” and “AUDIO OUT” port, an analog C.O. line interface and an analog phone port. Several pre-written applications are included and can be installed for use. In addition, all available source code is provided to allow changes or improvements to existing programs. Description détaillée -
VIKING ELECTRONICS | K-1900-7 | Hot Line Panel Phone
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : K-1900-7
The K-1900-7 panel phone will auto-dial a 1-32 digit programmable phone number each time the handset is lifted. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls.
The K-1900-7 housing consists of a heavy gauge stainless steel panel, an armored cable, a heavy duty handset, and an all metal cradle. The K-1900-7 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory.
For outdoor or harsh environments, the K-1900-7-EWP is available with Enhanced Weather Protection (EWP). The EWP version includes faceplate, transmitter and receiver gaskets, hand soldered silicon sealed connections, gel-filled butt connectors, as well as a urethane potted circuit board with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming
-
VIKING ELECTRONICS | DVA-2WA | Promotion On Hold Announcer/Repeater; 7.5 Minutes Record Time; Pre-recorded messages, 2 Watt Amplifier
DEMANDER UN DEVIS à info@ovaltel.caCode de produit : DVA-2WA The DVA-2WA is a digital announcer/recorder with a built in 2 watt amplifier. Designed to provide music and promotion on hold, the DVA-2WA can playback in a continuous loop or alternate between promotions and an auxiliary music source at 2 second to 30 minute intervals. Any number of multiple messages may be recorded. The announcer comes with four professionally pre-recorded promotion on hold pacifier messages, as well as, power supply and cabling for an easy plug and play installation. The output of the DVA-2WA may also be connected directly to loudspeakers with messages repeated in timed intervals or played at the push of a button for museum displays, information booths, point of interest locations, etc. The DVA-2WA’s non-volatile memory eliminates the need for batteries or costly built in tape decks. This provides the convenience of recording at the shop or professional studio and then shipping to the installation site. Description détaillée -
VIKING ELECTRONICS | MTG-10 | Multi-Tone Generator
DEMANDER UN DEVIS à info@ovaltel.caProduct code : MTG-10
The model MTG-10 is a multi-tone generator designed to add multiple contact-controlled audio tones to paging systems or 600 ohm inputs.
The MTG-10’s audio input can be connected to any paging source, ie: phone system paging port or background music. When a contact closure is provided to one of the inputs, the paging or background music is faded out and the appropriate tone is generated over the paging system. The siren or the evacuation whoop always have priority and over-ride any other tone being generated.
The MTG-10 can also be configured to provide a tone every 15 seconds to notify callers that their conversation is being recorded.
